AS 12508:2021 pdf free download - Earth-moving machinery - Operator stationand maintenance areas— Bluntness of edges (ISO 12508:1994.MOD)

AS 12508:2021 pdf free download – Earth-moving machinery – Operator stationand maintenance areas— Bluntness of edges (ISO 12508:1994.MOD)

Posted by

AS 12508:2021 pdf free download – Earth-moving machinery – Operator stationand maintenance areas— Bluntness of edges (ISO 12508:1994.MOD).
2 Normative references
The following standards contain provisions which, through reference In this text, constitute provisions olthis International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to Investigate the possibility of applying the most recent editions of the standards Indicated below. Members of lC and ISO maintain registers of currently valid International Standards.
ISO 2860:1992, Earth-moving machinery — Minimum access dimensions.
ISO 2867:1994, Earth-moving machinery —Access systems.
ISO 6165:1987, Earth-moving machinery — Basic types — Vocabulary.
3 Requirements
Structural edges and corners (see figure 1) of metallic and non-metallic materials of sufficient hardness to cause contusions or punetratlon olthe human skin shall comply with the requirements in 11 to 3,3.
3.1 Edges of parts shall he rounded or chamfered to a minimum dimension of 0,3 mm as shown in figure 2. or fitted with a protective strip. For edge thicknesses of 1 mm or less, a protective strip shall be fitted.
3.2 External corners such as on cab or service doors and pointed objects shall have a minimum radius of 4 mm.
This Appendix lists the normative variations to ISO 12508:1994.
ZZ.2 Variations
The following modifications are required for Australian conditions:
Element Instruction/New text
Cl 2 I After the first paragraph, add the following:
The Australian Standard listed below is a modified adoption of, or not equivalent to, the ISO normative reference and is required for the application of this Standard. All references in the source text to that ISO normative reference shall be replaced by references to the corresponding Australian Standards. Austrahan or Australian/New Zealand Standards that are identical adoptions of international normative references may be used interchangeably.
2 Delete iSO 2867:1994, Earth-moving machinery— Access systems” and replace with the following:
AS 5327:2019. Earth-moving machinery — Access systems (ISO 2867:2011. MOD).

Leave a Reply

Your email address will not be published. Required fields are marked *