AS ISO 20957.7:2021 pdf free download – Stationary training equipment Part 7: Rowing machines, additional specific safety requirements and test methods

AS ISO 20957.7:2021 pdf free download – Stationary training equipment Part 7: Rowing machines, additional specific safety requirements and test methods.
This document specifies safety requirements for rowing equipment.
This document is intended to be read in conjunction with the general safety requirements of ISO 20957-1
This document is applicable to rowing type stationary training equipment. hereinafter referred to as
rowing equipment, within the classes H, Sand land classes A, B and C regarding accuracy.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements ol this document. For dated references, only the edition cited applies. For undated references, the latest edition o[the referenced document (Including any amendments) applies.
ISO 20957-i, Stationary training equipment — Part 1: General safety requirements and rest methods
3 Terms and definitions
For the purposes olthls document, the ternis and definitions given in ISO 209574 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https/Jwww .orgJobp
— IEC Electropedla: available at http://www.electropedla.orgJ
3.1
rowing equipment
stationary training equipment with a moving seat simulating a rowing-like motion
7 Test report
In addition to the information in the test report in Iso 20957-1, the test report shall include at least the following information:
a) name and address of testing laboratory and location where the test was carried out when different from the address of the test laboratory;
b) unique identification of report (such as serial number) and of each page. and total number of pages of the report;
c) name and address of client;
d) description and Identification of the test item;
e) date of receipt of test Item and date(s) of performance of test;
f) identification of the test specification or description of the method or procedure;
g) description of sampling procedure, where relevant;
h) any deviations, additions or exclusions from the test specification, and any other information relevant to a specific test;
i) measurements, examinations and derived results, supported by tables, graphs, sketches and photographs as appropriate, and any failures identified;
j) a statement on measurement uncertainty (where relevant);
k) a signature and title or an equivalent marking of person(s) accepting technical responsibility for the test report and date of Issue;
I) a statement to the effect that the test results relate only to the items tested;
m) a reference to this document, I.e. 150 20957-7:2020.