AS ISO 6747:2021 pdf free download – Earth-moving machinery – Dozers – Terminology and commercial specifications

AS ISO 6747:2021 pdf free download – Earth-moving machinery – Dozers – Terminology and commercial specifications.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amend ments) applies.
ISO 5010, Earth-moving machinery — Rubber.tyred machines — Steering requirements
ISO 6014, Eorth•moving machinery — Determination of ground speed
ISO 6746-1, Earth-moving machinery Definitions of dimensions and codes — Pan 1: Base machine
ISo 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments
ISO) 7457. Earth-moving machinery — Determination of turning dimensions of wheeled machines
ISO 9249:2007, Earth-moving machinery — Engine test code — Net power
ISO 15550:2002, Internal combustion engines — Determination and method for the neasurement of engine
power — General requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 General
3.1.1
dozer
elf.propclled crawler or wheeled machine with equipment having either a dozing attachment which cuts, moves and grades material through forward motion of the machine ora mounted attachment used to exert a push or a pull force
[SOURCE: ISO 6165:2012,4.11
Note 110 entry: See Figures 10. U.
3.1.2
base machine
machine with a cab or canopy and operator-protective structures if required, without equipment or attachments but possessing the necessary mounting for such equipment and attachments
3.3.4.1
longitudinal static slope capacity
maximum slope, expressed In degrees, that the machine can achieve longitudinally (I.e. orientated at 00 and 180°) during the static slope evaluation without exceeding performance parameters
(SOURCE: ISO 10266:1992, 3.5]
3.3.42
lateral static slope capacity
maximum slope, expressed in degrees, that the machine can achieve laterally (i.e. orientated at 90° and 270°) during the static slope evaluation without exceeding performance parameters
(SOURCE: ISO 10266:1992. 3.6]
3.3.5 Winch performance
3.3.5.1
line pull
winch pull force measured at engine rated speed with lull drum and bare drum
3.3.5.2
line speed
winch speed measured at engine rated speed with full drum and bare drum
3.3.6
brake system
all components which combine together to stop and/or hold the machine. including the brake control(s), brake actuation system, the brake(s) themselves and, if the machine is so equipped, the retarder
(SOURCE: ISO 3450:2011,3.1]
3.3.7
brake system
all the components that combine to stop and/or hold the machine, Including the control(s), the brake actuation system, the brake(s) and all parts connecting the brake to the track
[SOURCE: ISO 10265:2008.3.1]
3.3.8
turnIng radius of wheeled machines
turning radius of wheeled machines as determined in accordance with ISO 7457
4 Base machine
4.1 Type of dozer
IJozers shall be classified according to the following attributes.