ASME A112.6.3:2001 pdf free download.FLOOR AND TRENCH DRAINS.
ASME A112.6.3 establishes design requirements icr floor. area. adjustable flour, and trench drains that arc used inside of. or oUtside and immediately adjacent to. huikling structures that arc typically nonresidential. It includes dchniüons. nonicnclaiure. outlet types and connections, grate.frce area, top loading classifications. maicrials and finishes, and %ariations in product design.
1.2 Units of Measurement
Values arc stated in U.S. Customary units and the international System of Units (SI). The U.S. Customary units shall be considered as the standard.
1.3 Illustrations
11w illustrations (figures) included in this Standard are inteitiled only w describe and polray yp.cal floor and trench drain types and are not intended to restrict design or to be used for specification purposes.
1.4 Reference Standards
The following documents l’onn a pan of’ this Standard to the estent specified herein nbc latest issue shall apply):
ASThI A 4$. Grey Iron Castings
ASTM A 74. Cast Iron Soil Pipe & Fittings
ASTM A 307. Carbon Steel Externally Threaded Fits- tenets
ASTM A 536. Ductile Iron Castings
AS•r A 563. Carbon and Alloy Steel Nuts
ASTM A 888. I lubless Cast Iron Sanitary Systems
ASTM B 16. Free Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
ASTM B 584, Copper Alloy Sand Castings for General Applications
ASThI C 564. Rubber Gaskets for Cast Iron Soil Pipe and Finings
ASTM C 584. Copper Alloy Sand Castings for General Applications
ASTM D I 24$. Polyethylene Plastic Molding Matenals
6.1.1 Cast Iron. Castings shall conform to ASTM
Specification for Grey Iron Castings A 48. Class 25.
The minimum thickness for the casting shall be ‘32
in. (5.6 mm).
6.1.2 Copper Alloy. Castings shall conform to the chemical and mechanical requirements of’ ASTM B 584 for Copper Alloy Nos. C3600, C83800. and CX4400. The minimum thickness for the casting shall be 5/ in. (4 mm).
6.1.3 Leaded Nickel Bronze (Nickel Silver). Castings shall conform to the chemical and mechanical requirements of ASTM B 584 for Copper Alloy Nos. C97300. C97600, and C99700. The minimum thickness for the casting shall be 12 fl. (4 mm).
6.1.4 ABS. Floor drain bodies manufactured from Acrylonitrile-Butadiene-Styrene (ABS shall conform to physical property requirements contained in ASTM D 3965, The cell classification shall be 3-2-2-2-2. The minimum thickness for the mold shall be S/32 in. (4 mm). Inserts for listencrs in plastic drains shall be molded into the plastic material.
6.1.5 PVC. Floor drain bodies manufactured from Poly (Vinyl Chloride) (PVC) shall conform to physical property requirements contained in ASTM Dl784. The cell classification shall be 12454-B. 12454-C, or 14333-C. The minimum thickness for the mold shall be /12 in. (4 mm). Inserts for fasteners in plastic drains shall he molded into the plastic material.
6.1.6 Bolting Materials. The materials for studs. nuts, cap screws, and other steel fasteners shall at least equal the requirements of ASTM Specifications A 307. Carbon Steel Externally Threaded Fasteners. Grade A. and A 563, Carbon and Alloy Steel Nuts. Grade A. Threads shall be Classes 2A and 213, and shall be plated.
6.2 Finishes
In all cases in which parts are to be coated or plated. they shall be cleaned to provide a suitable surface for proper bonding of the Finish.
6.2.1 Paint Coatings. Iron castings shall be cleaned and coated with a suitable paint. lacquer. or synthetic coating of quality to provide protection against rusting of ferrous surfaces during normal handling and warehousing prior to installation.
