ASME B107.1:2002 pdf free download

ASME B107.1:2002 pdf free download.SOCKET WRENCHES,HAND (INCH SERIES).
ASTM B 53770(1992)d Standard Practice for Ratrng of Elcctruplascd Panels Subjected to Atmospheric Eposurc
ASTM B 571-97, Standard Test Mcthnds for Adhesion of Metallic Macnals
ASTM D 968-93. Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM E 2000. Standard Test Mcthods for Rockwell Hardness and Rockwell Superficial Hardness of the tallic Matenals
Publisher; Amcrian Society for Testing and Materials (ASTM), 100 Barr lIbor Drive, West Conshohocken. PA l942X-295)
Guide to Hand Tools Selection. Safcty Tips. Proper Use and Care
Publishcr: hand Tools Institute lIm), 25 North Broadway, Tarrytown, NY 10391
4 REQUIREMENTS
4.1 IllustratIons
The illustrations shown herein arc dcscnpuvc and not restñctive. and are not intended to preclude the manufacture of sockets that arc otherwise in accordance with this Standard
4.2 Materials
The materials used in the manufacture of the sockets shall be such as to produce tools conforming to requirerncnts in this Standard.
4.3 Markings
Sockets shall he maiked in a plain and permanent manner with the manufacturer’s name or jib a trademark of such known character that the source of manufacture and cminrry of ongm may be readily determined. In addition, sockets shall be marked in a plain and permanent manner with the nominal size of the wrench opening (distance across flats) for the nut. bolt, or wirw end
(a) Sorkets. A drove end lest mandrel of sutaNe strength and complying with the dimensional require mens of dic drive tang specified in ASME B107.4M shall be employed. The test plug shall be dnsen by any suitable manual or mechanical means. The socket shall be engaged on the end of a mandrel to a depth in acc dance with tables herein, Means shall he pen. vided to maintain the mandrel insenioa depth.
(b) tiniwrsai Sorkes. Tests shall he made in the came manner as speciñed in (a) above except that means shall be provided to keep the paris of the unisersal socket assembly on a common axis about which the torque is applied.
52.2 Mandrels for Wrench Openings. Suckcts shall be tested on ,nandrcls. Six-point or 12-point hexagonal sockets shall be tested on hexagonal mandrels, Four- or eight-point sockets shall be tested on square rnandrels. The size of all nandrels shall conform to the tabics herein. Mandrels shall he hardened to not less than 56 HRC.
5.3 Coating Process Qualification Test
The Coaling Process Qualification Test (or Alternate Coatings shall be performed to certify the nunufacturers producuon coating process. The Coating Process Qualilication Test consists of an adhcs)on. abrasion. and corrosion test specified in par-as. 5.32. 5.33. and 5.3.4. The Coating Process Qualification Test may also be perfonned to certify the mantfacturcr’s NickelChromium plating process. Passing the Coating Process Qualification tests, when agreed to by the customer. exempts the manufacturer from the Nickel-Chromium Thickness requirement of para. 4.7.2(a) and the Nickel- Chromium Adhesion requwemeni of para. 47.2(b).
Rctcsting may he required when a significant change occurs in the process, when there is a change in the matcnals. or when contractually required by the customer.