ASME B107.410:2018 pdf free dwonload

ASME B107.410:2018 pdf free dwonload

Posted by

ASME B107.410:2018 pdf free dwonload.Struck Tools.
ASME B107.410 provides performance and safety requirements for struck tools, Including splitting wedges; glaziers’ chisels; wood chisels; ripping chisels; iloorlng/electflcians’ chisels; handheld screw and pipe extractors; handheld and handled metal chisels, punches, and drift pins; nail sets; brick chisels, brick sets, and handheld star dhlis; nail-puller bars; pry bars; and slugging and striking wrenches. The tools covered herein are listed by Category number in Table 1-1.
The names and Intended uses given in Table 1-1 are those generally recognized.
This Standard is intended to serve as a guide in selecting. testing. and using the hand tools covered herein. Details of design, LesLilig. and use ol (1w toolS coveie’sl ale spec aled only as (hey relate to salety. It as iao the pulpvse of this Standard to specifr the details of manufacturing.
The designs covered by this Standard are not limIted to those named or Illustrated. Manufacturers may make conforming struck tools other than those listed. Consumers are requested to consult with manufacturers concerning lists ul stock products.
The methods employed to ensure compliance with this Standard shall be determined by the proper regulatory or administrative authority.
(b) for Category 44 tools, the angular or curved portion of the chisel adpcent to the cuttingedge extending to the bbde or taper,
(c) for Categoty 48 tools, the conical portion of the punch adacent to the point end extendingto the taper or the angular portion ul the chisel adjacent to the cutting edge extruding to the taper.
(d) for Category SO tools, the angular portion nfthe brick chisel, brick set, or star drill adjacent to the cutting edge and extending to the taper.
hIade for Category 44 tools, the portion of the gla?ierc’ or wood chisel opposite the struck face used for cutting. body;
(a) for Category 41 tools, on glazlers’ and wood chisels, the metal portion of the chisel extending from the blade. On rapping and Ilouringjelectracians chisels, the suaighl portIon ul the chisel between the chamfer and the taper.
(b) for Category 46 tools, the portion of the extractor exclusIve of the taper and/or flutes.
(c) for Category 48 tools, the straight portion of the punch or chisel between the chamfer and taper or the tapers of the drift pin.
(d) for Category 49 tools, the portion ol the nail set between the head and taper, used for holding during nail-setting
(e) for Category43 tuls,theangled Ilatsuilaceor equivalent radlusofthewedgeencirchngthe perinwter of the struck face.

Leave a Reply

Your email address will not be published. Required fields are marked *