ASME B16.21:2005 pdf free download

ASME B16.21:2005 pdf free download

Posted by

ASME B16.21:2005 pdf free download.Nonmetallic Flat Gaskets for Pipe Flanges.
ASME B16.21 covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets. These gaskets are dimensionally suitable for use With flanges described in the referenced flange standards.
1.2 Relevant Units
This Standard states values both in metric and U.S. customary units. As an exception, diameter of bolts and flange bolt holes are expressed in inch units only. These systems of units are to he regarded separately as standard. Within the text, the U.S. customary units are shown in parentheses or in separate tables. The values stated in each system are not exact equivalents; therefore, it is required that each system of units be used independently of the other. Except for diameter of bolts and flange bolt holes, combining values from the two systems constitutes nonconformance with the Standard.
1.3 QuaUty Systems
Requirements relating to the product manufacturers’ quality system programs are described in Nonmandatory Appendix A.
1.4 References
Standards and specifications adopted by reference in this Standard are shown in Mandatory Appendix II.
2 TYPES AND SIZES
2.1 Types
Dimensions are provided for the following types of gaskets, which are suitable for use with the flange faces indicated:
2.3 Pressure Class Designation
Class, followed by a dimensionless number, is the designation for common flange pressure-temperature ratings as given by the referenced flange standards.
3 MATERIALS
3.1 Composition
Gaskets shall be made of resilient or pliable materials. Metal or nonmetal composites may be incorporated as reinforcement or filler material
3.2 Service Requirements
Selection of a material suitable for a given service application is the responsibility of the user subject to the requirements of any applicable code or governnwnt regulation. The material selected shall be compatible with the fluid and suitable for the pressure-temperature conditions of the service.
4 DIMENSIONS AND TOLERANCES
4.1 DImensions
Gasket dimensions shall be in accordance with Tables 1 through 9 (Tables 1-1 through 1-9 of Appendix I) for thc flanges standards, sizes, and classes indicated.

Leave a Reply

Your email address will not be published. Required fields are marked *