ASME II SA29:2010 pdf free download

ASME II SA29:2010 pdf free download.SPECIFICATION FOR STEEL BARS,CARBON AND ALLOY, HOT-WROUGHT, GENERAL REQUIREMENTS FOR.
0.230 in. in minimum thickness for over 6 to in. in width. inclusive lover 5 mm in thickness up to 150 mm in width; and over 6 mm in thickness for over 150 mm through 200 mm in widthl. Maximum thickness for all widths is 4 in. [100 mmj.
3.1.1.5 He.tagans and Ortagon.c — to in. (6 to 103 mmj, inclusive, between parallel surfaces,
3.1.1.6 Mar Size Shapes — Angles. channels, tees. sees, when their greatest cross-sectional dimension is under 3 in. (75 mml, and
3.1.1.7 Spec ía! Bar Section.c — Half-rounds, ovals, half-ovals, other special bar size sections.
3.1.2 Cold-Finished Steel Bars — Steel bars produced by cold linishing previously hot-wrought bars by means of cold drawing. cold forming, turning, grinding. or lishing (singly or in combination) to yield straight lengths or coils in sections that are uniform throughout their length and in the following sections and sizes:
3.1.2.1 Rounds — 9 in. 1230 rnrnl and under in diameter,
3.1.2.2 Squares —6 in. 1150 mrnl and under between parallel surfaces.
3.1.2.3 Hexagons — 4 in. 1100 mml and under between parallel surfaces.
3.1.2.4 Flats — !‘ in. 13 mml and over in thickness and not over 12 in. (300 mmj in width, and
3.1.2.5 Special Bar Sections:
3.1.3 Lot — Unless otherwise specihed in the contract or order, a lot shall consist of all bars submitted for inspection at the same time of the same heat, condition, finish, size, or shape. For bars specified in the quenched and tempered condition, when heat treated in batch-type furnaces, a lot shall consist of all bars from the same heat. of the same prior condition, the same size, and subjected to the same heat treatment in one tempering charge. For bars specified in the quenched and tempered condition. when heat treated without interruption in a continuous- type furnace, a lot shall consist of all bars from the same
11.2 Material that shows imperfections capable of adversely affecting processibility subsequent to its acceptance at the purchaser’s works will be rejected. and the manufacturer shall be notilicd.
12. Rehearing
12.1 Samples that represent rejected material shall be preserved for two weeks from the date rejection is reported to the manufacturer. In case of dissatisfaction with the results of the tests, the manufacturer may make claim for a rehearing within that time.
13. Product Marking
13.1 Cñiiian Prnurr,ntnt — Bars of all sizes, when loaded for shipment, shall be properly identified with the name or brand of manufacturer, purchaser’s name and order number, the ASTM designation (year date is not required), grade number where appropriate, size and length. weight of lift. and the heat number for identification. Unless otherwise specified. the method of marking is at the manubcturcr’s option and may be made by hot stamping. cold stamping, painting, or marking lags attached to the lifts of bars.
13.1.1 Barcode marking may be used asan auxiliary method of identification. Such bar-code markings shall be of the 3-of-9 type and shall conform to AIAG HI. When barcoded tags are used, they shall conform to AIAG B5.
13.2 Giwe’rn,neng Prucurernent:
13.2.1 Marking for shipment shall be in accordance with the requirements specified in the contract or order and shall he in accordance with MIL-STD-163 for military agencies and in accordance with Fed. SW. No. 123 for civil agencies.
13.2.2 For government procurement by the Defense Supply Agency. the bars shall be continuously marked for identification in accordance with Fed. Sid. No. 183.
14. Packaging
14.1 Civilian Procurenent — Unless otherwise specified, the bars shall be packaged and loaded in accordance with Practices A 700.
14.2 Governnent Procurement — MIL-STD-l63 shall apply when packaging is specified in the contract or order. or when Level A for preservation. packaging. and packing is specified for direct procurement by or direct shipment to the government.
15. Kcwords
15.1 alloy steel bars: carbon steel bars: cold finished steel bars: general delivery requirements: hot wrought steel bars: steel bars.