ASME Y14.1M:2005 pdf free download

ASME Y14.1M:2005 pdf free download

Posted by

ASME Y14.1M:2005 pdf free download.Metric Drawing Sheet Size and Format.
ASME Y14.1M defines metric sheet size and formats for engineering drawings. Decimal inch sheet sizes and format are defined in ASME Y14.1. For engineering drawing preparation and practices, see ASME Y14.100.
1.2 Purpose
Standardization of drawing sizes and the uniform location of format features on drawing forms provides definite advantages in readabilit handling, filing, and reproduction. In using drawings made by other organizations, an advantage is gained when like items of information are in the same location on all drawings, and when uniformity of form and language is applied in making information entries. Revision information and dates are of particular importance to users of drawings and should be located and expressed uniformly on all engineering drawings.
The widespread use and exchange of reduced size copies of drawings both within and between organizations emphasizes the importance of standardization of drawing size and format.
1.3 Units
All dimensions used in this Standard are in millimeters.
1.4 Applicable Documents
The following documents form a part of this Standard to the extent specified herein. Unless otherwise indicated, the latest edition shall apply.
ASME Yl4.l, Decimal Inch Drawing Sheet Size and Format
ASME Yl4.2M, Line Conventions and Lettering
ASME Y14.3M, Multiv iew and Sectional View Drawings
ASME Y14.5M, Dimensioning and Tolerancing
ASME Y14.34M, Associated Lists
ASME Y14.35M, Revision of Engineering Drawings and Associated Documents
ASME Y14.100, Engineering Drawing Practices
Publisher: The American Society of Mechanical Engineers (ASME), Three Park Avenue New York.
NY 10016-5990; Order Department: 22 l.aw Drive, P.O Box 2900, Fairfield, NJ 07(k)7-2900
Block F: Approval by the design activity when different from the source preparing the drawing. This may be necessary when a contractor— subcontractor condition exists; otherwise this block may be absorbed into Block E, or it may be used for other purposes.
Block G: Approval by an activity other than those described for Blocks E and F. Where not required, this block may be absorbed into Block E or it may be used for other purposes.
Block H: Predominant scale of the drawing sheet. Enter “NONE” when no scale is used. Each sheet may have a different predominant scale.
Block I: CAGE Code. When required for identification of the original design activity whose drawing number is used. For the commercial sector where there is no requirement for the CAGE Code, the CAGE Cede block may be left blank or eliminated.
Block J: Drawing size designation. See Tables I and 2.
Block K: Actual or estimated weight of the item when required. This block is shown on sheet one only.
Block L: Sheet number. Enter the appropriate sheet number beginning with the numeral 1. The drawing shall be prepared initially using consecutive whole numbers.
4.3 ContinuatIon Sheet Title Block
As a minimum, the continuation sheet title block shall contain the following: Blocks C, H, I,J, and L. See Figs. 6 and 7.
5 REVISION HISTORY BLOCK
5.1 Location
The Revision History block, as shown in Fig. 8, is located in the upper right corner of the drawing. See Figs. 1 and 2. Space shall be reserved to extend the Revision History block downward as required, When additional space for the Revision History block is needed, a supplemental Revision History block may be located to the left of the original Revision History block. Revision History blocks may be included on continuation sheets
5.2 Contents
The Revision History block provides space for revision symbol, description or identification of the change authorization document, date, and approvals. The headings shall be presented as shown in Fig. 8. The zone column may be added when zones are included in thedrawing format, and the design activity desires to iden-tify locations of revisions. The width of the RevisionHistory block may be changed to provide for other col-umns as necessary.See ASME Y14.35M for completion requirements.

Leave a Reply

Your email address will not be published. Required fields are marked *