IEC 60130-17:1998 pdf download – Connectors for frequencies below 3 MHz-Part 17: Detail specification for interconnection devices which permit multi-directional mating,for use with rechargeable batteries.
This part of IEC 60130 is a connector detail specification for a battery rnterconnection system for portable computers, cellular telephones and other electronic devices requiring power not to exceed 50 V d.c. SELV (Safety Extra Low Voltage).
1.2 Normative references
The following normative documents contain provisions which, through reference in fhis text, constitute provisions of this part of IEC 60130. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 60130 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards
IEC 60130-0:1970. Connectors for frequencies below 3 MHz – Part 0: Guide to drawing information in detail specifications
IEC 60130-1:1988. Connectors for frequencies below 3 MHz — Part 1: General requirements and measuring methods
IEC 60512-1:1994. Electromechanical components for electronic equipment; basic testing procedures and measuring methods — Part 1: General
IEC 60512.2:1985. Electromechanical components for electronic equipment: basic testing procedures and measuring methods — Part 2: General examination, electrical continuity and contact resistance tests, insulation resistance tests and voltage stress tests
IEC 60512-3:1976. Electromechanical components for electronic equipment; basic testing procedures and measuring methods — Part 3: Current-carrying capacity tests
IEC 60512.4:1976. Electromechanical components for electronic equipment: basic testing procedures and measuring methods — Part 4. Dynamic stress tests
IEC 60512-5:1992. Electromechanical components for elecfronic equipment: basic testing procedures and measuring methods — Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
IEC 50512.6:1984. Electromechanical components for electronic equipment: basic testing procedures and measuring methods — Part 6: Climatic tests and soldering tests.
